this is one set of Electropods (search on ebay)

purple.

photobucket page (http://s19.photobucket.com/albums/b170/04vrscb/yamaha_V_star_950/)


okay, faked you out.


the videos of the exhaust took too long to load, i will load the LED pics tomorrow :rolleyes:

edit:double fake...pics are up....., just check the link

http://i19.photobucket.com/albums/b170/04vrscb/yamaha_V_star_950/DSC05224.jpg

http://i19.photobucket.com/albums/b170/04vrscb/yamaha_V_star_950/th_DSC05229.jpg (http://s19.photobucket.com/albums/b170/04vrscb/yamaha_V_star_950/?action=view&current=DSC05229.jpg)




http://i19.photobucket.com/albums/b170/04vrscb/yamaha_V_star_950/DSC05228.jpg

looks very beautiful.. how much did it cost ?

search ebay for electropod...

about $40 shipped or so.

you can put them on your self, nothing to it

search ebay for electropod...

about $40 shipped or so.

you can put them on your self, nothing to it

but how does it behave in rains ?

also i don't have any connectors on my battery so how is it connected ?

so those just come on whenever you turn on the ignition?

it comes with a switch, I will have the wife pull the seat and take pics for you tomorrow.

you tie all the LED lead wires together, and use a "crimp on ring terminal" to connect it to the battery and to ground.

pics tomorrow, promise.

ohhok .. looking forward for pics :D

ok, pics are up...

took them yesterday, but got wore out working on a HD Rocker.

http://s19.photobucket.com/albums/b170/04vrscb/yamaha_V_star_950/

you can see the terminals here:

http://i19.photobucket.com/albums/b170/04vrscb/yamaha_V_star_950/DSC05446.jpg


Rocker pics:

http://s19.photobucket.com/albums/b170/04vrscb/Rocker_PCV_install/

http://i19.photobucket.com/albums/b170/04vrscb/Rocker_PCV_install/th_MOV05498.jpg (http://s19.photobucket.com/albums/b170/04vrscb/Rocker_PCV_install/?action=view&current=MOV05498.flv)

nice pics, thanks for sharing.

nice pics, thanks for sharing.

it's a hassle to re-invent the wheel.

you and your girl should be able to look at my 950 Photobucket page, and figure the basics of about any job to do, and have a go at it, without being too scared.

like my wife selected all the LED spots, cleaned them with alcohol,
dried the spot, cleaned back of the LED POD, dried them, put sticky tape on them, and put the POD's on the bike, and I was wiring them in right behind her.

two bolts on the rear of the tank let you lift it up (pivots on front mount)

and you and her could do it in a few hours with no drama.