Yamaha Starbike Forum banner

Jetting experts chime in

2K views 7 replies 3 participants last post by  qwikz74 
#1 ·
Hi all,got a quick question for the jetting experts.
I have a Hypercharger and Cobra speedster longshots on my bike and it has been professionally jetting by a shop so I don't know what's in it right now.The bike runs fantastic,no issues.My question is if I remove the hypercharger and go back to the stock dog dish what jets would I need for the exhaust only.My elevation is at 252 m (827 Ft) and the temps I ride in are between 59-95 (15-35 cel)

Thanks
 
#5 ·
Put a 115 in the front and a 112.5 in the rear.....actually if it was mine I'd just put in 2 115's....Mikuni jets of course...you can pick them up at your nearest Harley dealer.

Let me know if you wanna get rid of the HC....
 
#7 ·
Stock pilots are 17.5.....were they changed with the HC? Usually they aren't. Stock needles either in the only groove there is or in the center one. No shims. Adjust the PMS after you run it....but probably 2 1/2 will get you close with aftermarket exhaust.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top