Need help after neutral switch repair
I did the 'neutral switch oil leak' repair on my 650 just now and now the bike will not start unless the kickstand in up and the clutch is pulled in. Not getting the green neutral light indicator on the speedo either. What did I screw up? The bike won't run with the kickstand down like it thinks it's in gear. Seemed like a very simple straight forward repair. Just replaced the plastic piece and the ring that goes around it. Reattached the green wire to the screw and I was done. But, obviously something is not right. Any ideas on what I should look for? I guess I'll unscrew everything and then put it back together and see if I get a different result.