Yamaha Starbike Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
I've watched all the YouTube videos I can find, 2 inch hole saw,, long screwdriver, hammer screw driver in, cannot for the life of me loosen other end of the baffling,, I was thinking of take the exhaust covers off tomorrow and taking a deeper look, looks like the chrome just covers the pipe, am I correct on that?
 

·
Registered
2011 Yamaha VStar 650
Joined
·
547 Posts
I had the same issue. I had to drive a long flat screwdriver in between the pipe and the second baffle. Once it was wedged in there I then twisted it to open the gap up. Did this in several points around the pipe and it loosened it up so I could remove it.
 
  • Like
Reactions: Louisiana Jeff
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top