Joined
·
11 Posts
Anyone know if they make a bore kit to get a few more cc's out of a 650? I thought maybe someone would be working on a kit to bore a 650 out to the new 900. Love my bike, just could use more power.
bore kit???
Join the discussion
Recommended Reading
-
XVS650A "check engine" light newbie question--OFF or ON while engine is running?
V StarWhen you turn on ign key, does your yellow "check engine" light come on for a couple of seconds and then go out completely and stay off while engine is running? Or, does this light come on for a couple of seconds, go off and then come back and stay ON while engine is running? Mine on 2005 650...- 11
- 133
-
JEP · updated
-
1300 Fuel-injected bike over-fueling and flooding engine instantly.
V StarHello All, I've been helping my neighbor with his 2008? Yamaha V-Star 1300. Spring is here and his bike wouldn't start with a dead battery. So we went to replace the battery, only to find it wouldn't start anymore. Crank but no start and leak gas out the exhaust. I started with the plugs. Plugs...- 5
- 152
-
Yamaha VSTAR 1100 Baron Oil Filter Relocation Kit Installation ORK
V StarIn a previous video a few years ago I had touted the virtues of not using an oil filter relocation kit and the benefits, though I'd also listened to the feedback from folks and having gotten my hands on a kit we take the opportunity to install and evaluate the ORK. This is the Baron kit...- 0
- 12
-
jcrubin · updated
-
Yamaha VSTAR 1100 Tachometer Installation
V StarI happened to be doing some work on my bike and with it open, having received many requests, i'm making a video about how I install the tachometer in this model bike. Ill note the stock 1in bars are on this bike though I do have risers, however I show that on a bike without risers this...- 3
- 199
-
jcrubin · updated
-
Man, was this dry!
V StarI'm in the process of replacing the rear tire on my '01 650 Classic. I bought the tire from Cycle Gear so, I'm pulling the rear wheel myself for them to change the tire. After I got the rear wheel assembly off, I am appalled at how little grease there is on these splines. I was under the...- 3
- 80
-
JimCanaday · updated
Join now to ask and comment!