Yamaha Starbike Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
80 Posts
Discussion Starter #1
is it possible to remove the choke cable from the bars and have a setup with a nob on the side of the carb to just pull out .. trying to tidy up the front end so want less cables
 

·
Registered
Joined
·
46 Posts

·
Registered
Joined
·
2,181 Posts
I just cut my stock cable sleeve to about 2" and the stranded core at about 5"....did a loop and soldered the core to make a finger hole. Now I can just slip my finger through the loop and pull while starting if I need the choke....I only need it on rare occasion and for just a few seconds....so I just release it after the bike is running for 10-15 seconds... cost = $0.00
 
1 - 6 of 6 Posts
Top