[chitownfl]

I have a 2007 V-Star 1100 and have been thinking about getting risers for my handlebars. I found some on eBay and am looking for some input on this. My lower back bothers me when I ride for an hour or more so thought this may take care of the problem.

 

[Fulltilt1]

It might, be careful about going to big with them as you might have to replace cables/lines due to restricted movement.

 

[therealchuckdizzle]

http://www.baronscustom.com/catalog/display/775/index.html

In my experience, you can keep the stock cables simply by re-routing them.

 

[linerdave]

Risers

I see Yamaha has risers and handlebars. Handlebars might be an option.

http://www.starmotorcycles.com/star/products/modelsubcontaineritems/5/62/95/861/2009/0/all.aspx

Dave

 

[DMTJOY]

I added the PRO One riser with the tach with out changing my cables. I did have to reroute a couple of them.
http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=407084&store=Main&catId=&productId=p407088&leafCatId=&mmyId=9900160

 

[Fulltilt1]

Almost wish I had done that. Got my Pro-One tach on ebay, nobody bid on it just the tach and the upper plate in the kit for $50. It's hard to see though without the pullback risers.

 

[chitownfl]

Doug:

I added the PRO One riser with the tach with out changing my cables. I did have to reroute a couple of them.
http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=407084&store=Main&catId=&productId=p407088&leafCatId=&mmyId=9900160

Doug, do you have a picture that you could post or email me of this on your bike? I think this is the route that I am going since I did just jet my carbs and would like to set the idle between 950 - 1050 RPM's.