[LilBitOfCountry]

Someone stole my headlight off of my bike cutting the wires at the handlebars and got a LED Halo light not sure how to wire it in please help...

 

[Jspree]

If this is a VStar 650 here is the wiring diagram

 

[LilBitOfCountry]

If this is a VStar 650 here is the wiring diagram



thanks but I'm gonna be honest it reads to me as it's written in a foreign language.... I am bewildered

 

[Jspree]

Just look at the headlight and it will tell you what the color of the wire is , you can also see what colors are for the turn signals. I will also attach the service manual they may help you.

 

[dmil123]

attached is a colored diagram of the factory wiring for a 650.
yellow is headlight low beam
green is headlight high beam (dont confuse with green for right turn signal)

brown is for left turn signal
blue is running lamps
green is for right turn signal

black is ground

looks like some after market wiring was done with the red splice clamps.. so I dont know what the white after market wire might be. It would be more reliable to solder the connections and use heat shrink to seal the connection. Most big box hardware stores and Harbor Freight has the heat shrink.

 

[LilBitOfCountry]

Thank you so freaking much!!!!!!

 

[dmil123]

You are welcome. Just noticed that you recently joined so welcome aboard. lot of knowledgeable and helpful members on the forum. If you are agreeable, please use new member intro topic and tell us a little about yourself and your ride... bike pictures welcome! Happy trails.