I recently purchased an '05 V-Star 1100 with a Memphis Shades windshield and the quick release fork mounts. I'm interested in putting on a set of chome lowers, but; Yamaha chrome lowers require the use of the "V-Star windshield and mounts". I've only found the plexiglass lowers from Memphis. Have any of you fine gentlemen, or ladies, seen any chrome lowers that will fit the Memphis quick mounts. Oh, BTW I've checked all 34 pages of the V-Star forum and didn't find anything.
Lowers with Memphis Shades Quick Release
Join the discussion
Recommended Reading
-
2007 V-Star 650 idles fine, but bogs down when going through the gears
V StarI just bought this 2007 V-Star 650, which had the carbs in the saddlebags, as the previous owner had giving up. I cleaned and rebuilt the carbs thoroughly and put back together. She started fine, I adjusted the idle screw and decided to go for a quick ride around the block. I noticed my...- 7
- 92
-
Azuqui · updated
-
1100 to 650 Fit
V StarI am wondering if it would be possible to fit a shafts driven all aluminum wheel from an 1100 to a 650. The wheels are the same stock size, I just want to get rid of the spoke look. If not then could anyone recommend a place to get wheels for a 2003 650.- 4
- 144
-
TheMute70 · updated
-
2000 V-Star 1100 starting problem
V StarAfter a long winter (stored with gas stabilizer) the bike starts to turn over and then sounds like the starter disengages / clicking sounds?? I did get it started about a week ago and it did run but seemed to miss periodically... is this a fuel issue or a starter issue?- 4
- 72
-
OEM Quick Release Question For V Star 950 Tourer
V StarHello Everyone. Just picked up a mint 2014 950 Tour yesterday. I would like to convert my windshield and sissy bar OEM setup to the OEM quick release setup. For the windshield I understand I need two items. Brackets for the current windshield and brackets for the forks. But can I use my...- 0
- 26
-
Wikdnice · updated
-
V-Star 1300 clutch cable replacement
V StarI'm working with a 2009 Star 1300. I've seen this question asked before but no one ever posts HOW they changed the cable. I know the gas tank needs to be lifted or removed. Does the exhaust need to be removed as well? Looks like it's impossible to get to the engine-side of the cable without...- 1
- 53
Join now to ask and comment!