I just replaced my bars and risers with a drag "T-bar" set up, so if you are in need I can make you a good deal on a bar, riser and end weights.

I even have the stock grips that I removed and are in prefect shape.


BTW the "Clamp" part that holds the handlebars on is called the riser. You can replace the riser they normally come as a set and I don't currently know what a replacement from Yamaha costs.

 

A place called Stadium Yamaha (.com) lists everything OEM.

Bars: 111.98
Grip ends (bar weights): 14.93 x2
Screw caps: 2.79 x2
Lower Riser: 45.08 x2
Upper riser: 46.82 x2
Riser bolts: 1.05 x4
Riser bolt caps: 1.05 x4
Left Grip: 16.93
Right grip assy: 37.69


The (x2) is the number of items you get for the price, not the amount per item.


good luck

 

If your bike comes with a triple beam fork, then the first thing to do is to have the alignment checked. Then you can go about replacing bars and anything else that is bent.

my bike got pushed over in a parking lot, the bars were bent, but also, the triple beam fork mounts were also knocked out of alignment.
a simple knock over can get very expensive.

Dennis

 

Thanks for all the replies,

My riser seems to be bent back slightly, I'll get some pictures up soon.

The bike is a 08 650. How would I go about checking the alignment?

Thanks for the help

 

To get the alignment checked you will have to get a dealership to check it out for you since it requires special equipment.

Dennis